 |
|
 |
|
 |
|
 |
 |
WuXishi LiDa Rubber Machinary Co.,Ltd
Address:Xishanqu Bashi town of WuXi City
Contact:Mr Zhu(General manager)
Mobile:13812181988
Contact:Mr Zhu
Mobile:13961840178
Tel:0510-83781578
PD Tel:0510-83780811
Fax:0510-83788178
Post Code:214192
E-mail:sales@wxldxj.com
Website:www.graceparknews.com |
|
|
 |
| |
|
|
| 60T two-story four-mode automatic tire curing machine | | |  |
Hydraulic dual-curing machine, clamping force from the 25T, 40T, 60T, rmation of series production.
Hydraulic two-story four-modulus divide vulcanizer applicable to the tire cross-section dimensions 4 "below the range of tire curing capsule, the total area occupied by saving equipment, reducing labor intensity of workers, improve production efficiency. The bulk of equipment after use, to be used in "two-way heat conduction" method sulfide (internal pressure with steam pressure 0.8-1.5MPa Medium), vulcanization time can be cut by about 40-50%, improve production capacity to almost double the application of capsules can also improve life expectancy double! Can significantly improve the economic efficiency of enterprises. |
| Main technical parameters |
|
Project Name
|
Units of measurement
|
CLM-650/40
|
CLM-800-60
|
Remarks
|
The largest mold edge
|
T
|
40
|
60
|
|
Hot plate diameter
|
mm
|
650
|
800
|
Provided by the user
|
Upper and lower hot-plate spacing
|
mm
|
750-800
|
800-1200
|
Provided by the user
|
Applicable rim diameter
|
英寸
|
4”-6”
|
8”-18”
|
|
Quantity Abrasives
|
Deputy
|
4
|
4
|
|
Working pressure
|
Mpa
|
0.6-0.8
|
0.6-0.8
|
|
Internal pressure of the air
|
Mpa
|
1.8
|
1.8
|
|
Pressure steam
|
Mpa
|
0.8-1.5
|
0.8-1.5
|
|
Scheduled type pressure
|
Mpa
|
0.1-0.2
|
0.1-0.2
|
|
Vacuum pump
|
Mercury degrees
|
400-600
|
400-600
|
|
Vacuum pressure
|
Mpa
|
1.8
|
1.8
|
|
Host Dimension (length width)
|
mm
|
1200×800×2300
|
2450×860×2470
|
|
Station dimensions (length width)
|
mm
|
500×600×600
|
1020×700×970
|
|
Motor Power
|
Kw
|
3
|
4
|
|
Host weight
|
Kg
|
|
|
|
|
| Note: The internal pressure medium used, the user shall determine the order for the parties in accordance with the contract requirements of the production. |
|
|
|
| | | | [Back] [Print] |
|
|
 |
| |
|
|
